Compact Pneumatic Cylinders, Short Stroke - C05 Series / Par

产品概况：

The C05 actuator is available in double acting bores Ø12 to Ø63mm and C05S in single acting bores Ø8 to Ø63mm. The main body is machined from one piece thus providing an easy to clean unit. With stainless steel piston rod as standard, anodised corrosion resistant body and thrust forces of up to 3000N it is ideally suited for clamping and locking operations.

General Technical Data:
• International standards : N/A
• Bore Sizes : Ø8, Ø12, Ø20, Ø32,  Ø50 and Ø63mm
• Stroke Length : 4, 5, 10 and 25mm (Standard strokes only)
• Versions : double acting (Ø12 to Ø63mm)  /  single acting, spring return (Ø8 to Ø63mm)
• Cushioning : N/A
• Position Sensing : N/A
• Installation : the compact design with mounting holes through the cylinder body makes the unit easy to install in confined spaces.
• Mounting Position : any

Operating and Environmental Data:
• Operating Medium : for best possible service life and trouble-free operation dry, filtered compressed air to ISO 8573-1:2010 quality class 3.4.3 should be used. This specifies a dew point of +3°C for indoor operation (a lower dew point should be selected for minus temperature operation and we recommend the use of an inline dryer) and is in line with the air quality from most standard compressors with a standard filter.
• Operating Pressure : 10 Bar Maximum
• Operating Temperature : -20°C to +70°C (Standard temperature)
• Pre-lubricated : further lubrication is normally not necessary. If additional lubrication is introduced it must be continued.
• Corrosion Resistance : resistant to corrosion

Material Specification - Cylinder:
• Front End Cover : Brass  /  Anodised aluminium (Single acting Ø50 to Ø63mm)
• Cylinder Housing : Anodised aluminium
• Piston Rod : Stainless steel
• Piston Rod Seal : NBR (Nitrile rubber)
• Piston Rod Bearing : Brass + PTFE (Polytetrafluroethylene) / Brass + Steel (Single acting (Ø50 to Ø63mm)
• Circlip : Spring steel
• Return Spring : Surface treated spring steel

性能特点：

油缸类型		Non-Guided
油缸动作		Double Acting | Single Acting Spring Return
通孔尺寸		8mm | 12mm | 20mm | 32mm | 50mm | 63mm
最大冲程（毫米）		25
最大冲程（英寸）		0.98
延长的冲程推力（牛顿）		28 to 1870 (at 6 bar)
延长的冲程推力（lbs)		-
收回冲程推力(N)		56 to 1750
收回冲程推力(ibs)		-
缓冲类型		-
端口尺寸		M5 | G1/8 | G1/4
杆端螺纹类型		Female
最大工作压力（Bar)		10
最大工作压力（psi)		145
运行环境温度 (C)		-20 to +70
运行环境温度 (C)		-4 to +158
遥感位置		-
装配选择		No
证书		-
活塞杆材料		Stainless Steel
阀体材料		Anodised Aluminium
后盖材料		Brass
阀体类型		Square
耐腐蚀的选择		Yes
可修复		No