Compact Pneumatic Cylinders, Cartridge Style - P1G Series /

产品概况：

The P1G actuator in bore sizes Ø6 to Ø16mm is a single acting spring return cartridge cylinder for standard temperature -20°C to +80°C. Constructed with a nickel plated brass body, stainless steel piston rod and return spring this compact cylinder offers a good level of corrosion resistance. A threaded body provides intergral mounting and cylinders are supplied complete with one piston rod nut and two mounting nuts all in nickel plated brass.

General Technical Data  
• International standards : N/A
• Bore Sizes : Ø6, Ø10, and Ø16mm
• Stroke Length : 5, 10 and 15mm (standard strokes only)
• Versions:  single acting, spring return
• Cushioning : N/A
• Position Sensing : N/A  
• Installation : threaded body offers integral mounting  
• Mounting Position : any

Operating and Environmental Data  
• Operating Medium : for best possible service life and trouble-free operation dry, filtered compressed air to ISO 8573-1:2010 quality class 3.4.3 should be used. This specifies a dew point of +3°C for indoor operation (a lower dew point should be selected for minus temperature operation and we recommend the use of an inline dryer) and is in line with the air quality from most standard compressors with a standard filter.  
• Operating Pressure : 2 to 7 Bar
• Operating Temperature : -20°C to +80°C (standard  temperature)
• Pre-lubricated : further lubrication is normally not necessary. If additional lubrication is introduced it must be continued.  
• Corrosion Resistance : high resistance to corrosion and chemicals.

Material Specification - Cylinder:
• Cylinder Body : Nickel plated brass
• Piston Rod : Stainless steel
• Piston Rod Nut : Nickel plated brass
• Mounting Nut : Nickel plated brass
• Seals : NBR (Nitrile rubber)
• Return Spring : Stainless steel

性能特点：

油缸类型		Non-Guided
油缸动作		Single Acting Spring Return
通孔尺寸		6mm | 10mm | 16mm
最大冲程（毫米）		15
最大冲程（英寸）		0.59
延长的冲程推力（牛顿）		17 to 120 (at 6 bar)
延长的冲程推力（lbs)		-
收回冲程推力(N)		3.8 to 6.6 Spring Force (at 6 bar)
收回冲程推力(ibs)		-
缓冲类型		-
端口尺寸		M5
杆端螺纹类型		Male
最大工作压力（Bar)		7
最大工作压力（psi)		102
运行环境温度 (C)		-20 to +80
运行环境温度 (C)		-4 to +176
遥感位置		-
装配选择		No
证书		-
活塞杆材料		Stainless Steel
阀体材料		Nickel Plated Brass
后盖材料		Nickel Plated Brass
阀体类型		Round
耐腐蚀的选择		Yes
可修复		No